Expert Answers about Trailer Door Holders
- Recommended Replacement Latch And Holder For A 2016 Fleetwood Bounder
- I took a look at those latches on your 2016 Fleetwood Bounder and was not able to find anything, unfortunately.
With that being said, the best we can offer is for a completely different replacement. I know this probably is not ideal, however if you're interested the closest I was able to find is the:
-T-Style Hook and Keeper Door Holder for Trailer Rear or Side Door # PLR9-A.
This door holder uses a low-profile hook and keeper to keep your door open while loading and unloading. The hook...
view full answer... - T-Style Hook and Keeper Door Holders for Cargo Trailer
- I have a solution for you but the largest size we have in the style you referenced is a 6" T-Style Hook and Keeper Door Holder item # 37210525. This one is also stainless steel and comes with mounting hardware. For a 10" long door latch we have the T-Style Hook and Keeper Door Holder for Enclosed Trailer item # 37210482. This is a plastic latch with a different ball style attachment. I have linked a review video.
view full answer... - Spacing Between Bolt Holes On Metal C Clip Door Holder
- Per the manufacturer The Replacement Sockets for C-Clip Door Holders # 37210595 has a spacing of 1.48 inches between hole to hole.
This Door holder is constructed of zinc-plated steel.
I attached a review video link below.
view full answer... - Closest Replacement RV Door Latch For A 2000 Coachman Catalina Lite
- I took a look at the Kwikee T-Style RV Door Holder w/ Bumper # LC381409 that you mentioned, and it appears that it actually measures 1-1/8" x 2-1/2", making this only 1/8th x 3/8" larger.
While we do not have an exact fit, we do have the:
-T-Style Hook and Keeper Door Holder for Enclosed Trailer # 37210465 which has the same 1" horizontal hole spacing, but is 2-1/4" vertically, making this only 1/8" larger than your current latch.
This product measures 4" long, is polar white in color,...
view full answer... - Replacement Nylon Door Sockets DH605 For A Horse Trailer
- The two sockets # DH38S and # DH600S are not interchangeable, unfortunately.
Both of these will work the same and both will do a great job holding the windows open, however, since you mentioned you have DH605, you'll need the Replacement Nylon Socket for DH604 and DH605 # DH600S.
If you wanted to swap out the entire assembly to the rubber sockets, you'll need the Plastic Stem and Rubber Socket Door Holder # DH39R.
view full answer... - What Holders do You Recommend for Keeping My Exterior Storage Doors Open on My Trailer?
- I have a great solution for holding your storage/compartment doors open. While we do not carry any latches with clips to hold compartment doors open, we do carry magnetic options. For that route, I recommend the Magnetic Door Catch for RV Baggage Doors - 1-1/2" Diameter - Qty 1 # OBE57FR. These magnets have an 8-pound hold weight and includes all hardware for installation. This set comes with a single magnet and a single strike plate.
view full answer... - Correct Replacement Oven Door for a Furrion C-FSRE21SA-SS Oven
- The Replacement Handle for Furrion Gas Oven # C-FCRD22LA-001 is only going to work with select Furrion Chef Collection 21" ovens so it's not going to work with your oven, unfortunately.
Instead, you'd need the Replacement Oven Door for Furrion 2-in-1 Range Oven # FR79ZR. The handle by itself is not available so you'd have to replace the entire door/handle assembly.
view full answer... - Replacement Window Frame For RV Entry Doors That Measure 15 x 25-1/4 Inches
- The Valterra Replacement Window Frame for RV Entry Doors # A77008 is the closest window frame replacement we carry to match your 15" wide by 25 1/4" window that measures in at 15 3/4" wide and 25" long, with an inside diameter of 12" wide and 21" long. The Valterra Replacement Window comes with the frame, glass, and seal but no mounting hardware.
Alternatively, the Valterra Entry Door Window Frame Assembly # A77051, has the same inside diameter as # A77008 at 12" wide by 21" long, and...
view full answer... - Available Plunger and Nylon Socket Door Holder
- The # DH604 and # DH605 come with both the plunger and the nylon socket, which is where the difference between the part you've linked and the parts you're referencing on our site. These are sold as sets of 1. The Replacement Nylon Socket for DH604 and DH605 # DH600S is available if you're just looking for the nylon socket and not the hardware/plunger, which is also sold singularly.
view full answer... - Safety Chain/7-Way Plug Holder Solution For A Square Tube Jack
- While we do not have an all-in-one device like the Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder for Trailer Jacks # JET-30 for square tube jacks, I do have another possible solution.
Instead, take a look at the:
-Bauer Products 7-Way Trailer Plug Holder # BA79VR, with the Curt Trailer Safety Chain Holder Bracket # C68CR.
This 7-way holder measures 5-1/4" long, 2-1/2" tall, and since it does not have any curve to it you can mount it to any flat surface like your square...
view full answer... - Recommended 7-Way Cable Plug And Cord Holder For A Trailer
- The closest option that we currently offer to the holder you have pictured would be the Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder for Trailer Jacks # JET-30.
view full answer... - Tool Holder Options to Pair with E-Track in Utility Trailer
- If you have a lot of tools with open ends then the Brophy 5 Slot Tool Rack # ETTH is a great option, but if you're looking to have individual holders for more customization then we have the following holders that differ by inner diameter:
- 1-5/16" ID # e85JR
- 1-1/2" ID # 3481710
- 1-5/8" ID # e86HR
view full answer... - License Plate Holder and Light for Use on Ramped Utility Trailer
- You can add a license plate holder and light to your ramped utility trailer either with a single item such as # LPL55CB or # PM436B, or you can choose separate plate holders and lights to let you choose the designs you most prefer, such as plate holder part # CR30830 and light part # LPL12CKM2B.
It may be easiest to use one product; my choice would be # LPL55CB since its LED light uses much less power than a typical bulb light (only about one-tenth as much power).
You will make a 2-wire...
view full answer... - Extra Cooler Carrier on Open Trailer
- The Pack 'Em Rack # PK-BM-OP1 holds a cooler, a backpack blower, and a line spool and is the closest product we carry to what you're looking for. We do not carry anything that is just a cooler holder.
view full answer... - Parts Needed To Switch To Dual Propane Tanks On A 2022 Forest River R-Pod Trailer
- To switch your 2022 Forest River R-Pod over to two propane tanks you'll need to start with the base. You can use the 20lb tank holder # 37220BL you were looking at or a 30lb tank holder # 37230BL. These can be bolted to the trailer tongue.
Once you have the holder in place and the tanks you can then install a dual-stage automatic changeover regulator like part # 37207-30395. You'll also want to pick up a mounting bracket # 37207-30405 to attach it to the tank holder. You can run pigtail...
view full answer... - Additional Blower Rack with Pack'Em Rack for Open Utility Trailers
- The Pack'Em Rack for Open Utility Trailers # PK-6-OP1 comes as is. However, we do sell a Lockable Blower Rack # RA-19 on it's on.
view full answer... - Is The Trailer License Plate # 328-003-71BE Submersible
- Yes, The Trailer License Plate # 328-003-71BE is weather proof. The cover has a durable black molded plastic construction and the clear lens is over white LEDs. It is compatible with 12V DC systems.
I attached a review video link below.
view full answer... - Type of Hardware for Installing Optronics License Plate Holder LP35BB
- The correct hardware to mount the Optronics License Plate Holder # LP35BB mostly depends on the type and thickness of the surface you want to mount it on.
This plate holder has 4 pre-drilled holes for mounting and these are hidden by the plate once it is installed. For most installations a 1/2-inch long # 6 stainless steel screw like # 1172904 is fine. Stainless steel is preferred to avoid the risk of corrosion.
view full answer... - Are Additional Parts Needed With PackEm Rack for Open Utility Trailers?
- Yes, the Pack'Em Rack for Open Utility Trailers # PK-6-OP1 will work with no additional parts. However, adapters are required for certain blowers, STIHL 340, 350, 550 and 600 models require # RA-STIHL. If you don't have these products you won't need additional parts. At this time we don't carry the Pack'Em Rack with the same features with only one or two trimmer holders that will fit open utility trailer.
view full answer... - Battery Dies After Installing Curt Harness # C56208 On My Vehicle
- There could be a few reasons that is causing your battery to drain after installing The Curt Harness # C56208. I recommend first testing to see if you have a bad converter box. While the fuse is in place, test the 4-way flat connector on the harness without any vehicle lights on using The Hook Probe Circuit Tester # PTW2993. You will need to test each pin. If you're getting a constant power at any of the pins with the vehicle lights off, then the converter box is bad and would need to be...
view full answer...
Go To Results